Professional Hex Bolts are a very common nut

October 17, 2022

Professional Hex Bolts are a very common nut

Those who are familiar with Nuts know that there are many types of nuts, such as Square Nuts, round nuts, ring nuts, Wing Nuts, Hex Bolts and so on. Then there are the excellent quality Hex Bolts that are common in the market. Why use Excellent quality Hex Bolts so often?

First, the hexagonal shape of the nut is for ease of use. On the machine, the nuts are sometimes not plentiful enough and there is little room for the nut wrench. High compatibility Hex Bolts only need to be turned 60 degrees at a time, you can slowly tighten the nut, turning 90 degrees each time. In other words, in order to tighten the nut, the hexagon is smaller, but the octagon nut tends to slip due to its small contact surface with the wrench. Rarely used, so High compatibility Hex Bolts are easy to use. Look again at the wrench. The handle of a common wrench and the wrench can be at a 30-degree angle, so that when the nut is installed in a narrow place and the wrench cannot move freely, the hex nut is just the wrench pulling the nut. Turn the wrench upside down and pull the nut again,
Excellent Quality Hex Bolts

The second is to use Firm Hex Bolts to maximize the use of materials. Because in terms of strength, large nuts are stronger than small nuts. In the past, nuts were usually ground from a round material. The same round bar is used to make Firm Hex Bolts instead of using the nut material. Hex Nuts are tall and made of round rods of the same thickness, much larger than square nuts.

The above is the Professional Hex Bolts are a very common nut we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:Bolt overview and classification